Advantages of Stainless Steel Screws

A screw made up of stainless steel is basically a fastener which is used to fasten two or more objects. They are most popular for being corrosion resistant. Stainless Steel Screws are also very popular because they are non-magnetic and are thus favored over other metals. It also has a lasting value compared to otherStainless-Steel-Screw07_05_2016_04_35_41 screws which will help in savings in the long run.

They are rust resistant

The main advantage of using stainless steel screws is that they are rust resistant. This feature makes it ideal to use it for marine and outdoor purposes. It is because the moisture does not cause it to rust. A rusty metal is weaker and cannot take heavier loads. Therefore, stainless steel is the best option available to use.

Stainless steel has a high melting point

As the stainless steel has a very high melting point, it makes it a very good option to use in machinery that has to undergo a massive amount of heat. This makes it very convenient as the screws can be undone anytime when the machinery needs to be repaired. At times, nickel is mixed into steel as it prevents the steel from becoming brittle in areas where the temperatures are very low.

They are very easy to clean

Stainless steel screws are very easy to clean due to the presence of chromium. The chromium creates a very lustrous surface which is very smooth. This gives a very aesthetic surface finish.

The stainless steel screws have immense strength and ductility

Stainless steel is known for its high ductility. The screws have a lot of strength and can carry immense weight. Therefore, it is preferred to be used on construction sites.

Not only are these screws very strong, but they are also completely recyclable as well. These have several advantages, and therefore one should definitely consider it the next time that you plan to fasten things together.

Advertisements

An Insight To The World Of Industrial Fasteners Manufacturers

imdustrial-fastenersFastener is a word we have heard often. These are no mysterious things but the hardware devices that are often used to connect objects together. These create temporary but strong joints that can be dismantle later when required. Back in Time: A brief history of Fasteners

The need for joining the objects together to create something bigger and better had its roots in the early civilizations. Its use can be seen in the varied things like simple cart to complicated irrigation systems and agricultural machines. However, the fasteners witnessed a very slow pace of growth despite their wide demand and use.

The lack of standardization kept pulling back the development of the industrial fasteners industries. But even back then, Industrial Fasteners Manufacturers produced them in different shapes, density and dimensions for catering to the need of specific local market.

Factors to consider before picking up the right fastener

There are a few points that must be considered regarding the fasteners:

  • Accessibility: Not every fastener can be obtained anytime and used anywhere. There are some that are readily available, and then there are some that are custom made on demand.
  • Weight restrictions: Different fasteners have different capacities of holding weights. Some are good with light objects while others are made to handle heavy weights exclusively.

Industrial Fasteners, after all, aren’t as innocent as they look. These tiny things can do a lot and cause heavy damages if picked wrongly and thus, Industrial Fasteners Manufacturers ensure that they are handled with utmost care.